Made to Measure
Your Custom Jacket Measurements
Thank you for your order. To handcraft your jacket for a perfect fit, we need a few measurements. It takes about 5 minutes — a friend and a soft measuring tape will make it easier.
Order Placed
2
Measurements
3
Handcrafting
4
Delivery
How to Measure
Lay a similar, well-fitting coat flat and relaxed on a table. All measurements in cm.
Measurement Guide
Shoulder WidthStraight across from shoulder point to shoulder point.
Chest Width2.5 cm below the armhole, straight across from side seam to side seam.
Waist WidthAt waist level (where the drawcord sits), from side seam to side seam.
Hem WidthAlong the bottom edge, straight across from side seam to side seam.
Front LengthFrom the highest point of the shoulder (HPS) down to the bottom edge.
Armhole DepthFrom the shoulder point down along the armhole curve to the underarm.
Sleeve LengthFrom the shoulder point, along the sleeve (over the elbow) to the cuff edge.
Cuff WidthAcross the cuff opening, edge to edge.
Back WidthStraight across the back, 2.5 cm below the armhole, seam to seam.
Waist Width – BackAcross the back at waist level, from side seam to side seam.
Hem Width – BackAlong the bottom edge of the back panel, seam to seam.
Collar Height (CB)At center back, from the collar seam to the top edge of the collar.
Tip: measure with the garment laid flat and relaxed — values may vary by ±1 cm due to fabric. For the best fit, compare with a well-fitting coat. Unsure about anything? Leave it blank and add a note below.
Not sure how to measure? Write to us at info@craftcanvas-clothing.com — we’re happy to walk you through it.